Roll-Up Sides Components

The T-Handle Kit is a simple, cheap and easy way to attach a handle to a roller bar. Each T handle kit is sold as a set of two.

Roll your greenhouse curtains up and down with the Guide Pipe for Roll-Up Curtain.

Gear box operators have internal brakes holding the roll-up sides in place very easily, and are super easy to roll up and down. A drill brace adapter can be used with a cordless drill to roll sides up and down. The gear box operator is easy to install...

Swaged tubing is used for the roller bar. Connect each pipe with swaged end into non-swaged end with 2 tek screws or with bolt and nut. Tubing is 1.315", 17 ga. x 21'.

Used at top of roll-up sides to hold rope.

125' rope to hold roll-up curtain in place.

Attach to the roller bar with tek screws to hold poly (curtain) to roller bars. Much better than curtain clips because poly does not tear.

13:1 Gear Crank Manual Gear Box with automatic brake allows you to easily roll up the sides of your greenhouse to help with passive temperature control. With the automatic brake built into the gear box, you can roll the sides up a little or a lot...

Can be used with cordless drill to roll sides up and down.

Can be used with cordless drill to roll sides up and down.

The Gear Guide Pipe Hardware is a kit of all the necessary hardware used to install the operators for your curtains.

Product Features Roll Bar Adapter for roll up greenhouse sides Works with 1.315" pipe Description The roll bar adapter connects your roll bar to the manual gear box. This adapter works with the 7:1 or 13:1 gear boxes.