-
Rimol Greenhouses
Aluminum/Polycarbonate Baseboard Kit
$1,130.00 - $2,140.00You'll never have to replace a wooden baseboard again! Rimol has developed a polycarbonate baseboard system that uses an aluminum extrusion, as an alternative to a wooden baseboard. Outstanding and long-lasting product that replaces wood baseboards...
-
Solid Foil Tape (1" x 150')
$19.00Foil tape for taping the top of Polycarbonate panels. Keeps dirt, debris, and moisture out. Use vented tape for the bottom side of panels.
-
Vented Tape for Polycarbonate (1" x 108')
$59.00Grey Foil Vented tape for taping the bottom of Polycarbonate panels. Keeps dirt and debris out while allowing condensation to freely drain from polycarbonate channels.
-
Rimol Greenhouses
Aluminum Flashing
$55.00 - $90.002" x 4" comes in 8' length. 4" x 4" comes in two 5' lengths (one 10' length piece cut in half for reduced shipping cost. Call for 10' pieces).
-
Rimol Greenhouses
H-Splice
$23.00Splice two pieces of polycarbonate on the walls of a greenhouse. One 12' length cut into two 6' sections for reduced shipping cost. For 12' lengths, please contact a Rimol Sales Associate.
-
Rimol Greenhouses
Ridge Profile
$172.00A ridge profile fastens with nuts and bolts to the ridge of the greenhouse that is covered in triple wall polycarbonate Use at the ridge of greenhouseFasten with 5/16” carriage bolts and nutsAvailable 12’2”
-
Rimol Greenhouses
8 ft. end wall wire lock base
$18.00An end wall wire lock base is used to attach poly to the greenhouse and works best with a wire lock system
-
Rimol Greenhouses
End Cap
$23.00Used for finishing around doors, fans and other equipment. One 12' length cut into two 6' sections for reduced shipping cost. For 12' lengths, please contact a Rimol Sales Associate.
-
Rimol Greenhouses
Glazing Bar Cap
Polycarbonate can be easily worked, molded, and thermoformed. The glazing bar cap is used with the glazing bar base for slicing through polycarbonate roofs. Used for splicing polycarbonate on roofs only. For splicing polycarbonate on end or side...
-
Rimol Greenhouses
Glazing Bar Base
Polycarbonate can be easily worked, molded, and thermoformed. The glazing bar base is used with the glazing bar cap for slicing through polycarbonate roofs. Used for splicing polycarbonate on roofs only. For splicing polycarbonate on end or side...
Polycarbonate Extrusions
As important as it may be to find the right covering for your greenhouse, the hardware needed to keep that covering secure is arguably just as critical. Our vast hardware inventory ranges from various polycarbonate accessories to end caps and glazing bar caps. Search our greenhouse building supplies catalog below to track down all the accessories you need to make your structure secure.
Rimol Greenhouse Systems has provided almost 30 years of service for growers across North America. Our greenhouse building supplies are top notch whether its hardware or fasteners. We’ll work with you to get your greenhouse structure up and running. With any further questions, please contact a Rimol Sales Associate.