Roll-Up Sides

Motors for automating Roll-Up Sides.  Interchangeable guide wheel set to switch between Left and Right Output.  Guide Pipe Assembly option includes an adapter, a 7' long piece of 1.315" OD guide pipe, and the hardware necessary to mount the...

The T-Handle Kit is a simple, cheap and easy way to attach a handle to a roller bar.  Each T-Handle Kit is sold as a set of two.

Roll your greenhouse curtains up and down with the Guide Pipe for Roll-Up Curtain.

Gear box operators have internal brakes holding the roll-up sides in place very easily, and are super easy to roll up and down. A drill brace adapter can be used with a cordless drill to roll sides up and down. The gear box operator is easy to install...

Swaged tubing is used for the roller bar. Connect each pipe with swaged end into non-swaged end with 2 tek screws or with bolt and nut. Tubing is 1.315", 17 ga. x 12'.

Extremely easy to installWill not cut polySuperior holding strengthLow cost per linear foot to installCan use just one wire over poly or can double wire for up to four layers or poly or shade cloth installationReusable when replacing polyCan easily bend...

Greenhouse rope hooks. Used on high tunnels at the top of roll-up sides to hold rope.

125' rope to hold roll-up curtain in place.

Attach to the roller bar with tek screws to hold poly (curtain) to roller bars. Much better than curtain clips because poly does not tear. These are 12' long parts cut into 6' lengths for cheaper shipping.  Please contact us for 12' lengths.

Can be used with cordless drill to roll sides up and down with gear box kit.  

The Gear Guide Pipe Hardware is a kit of all the necessary hardware used to install the operators for your curtains.

Product Features Roll Bar Adapter for roll up greenhouse sides Works with 1.315" pipe Description The roll bar adapter connects your roll bar to the manual gear box. This adapter works with the 7:1 or 13:1 gear boxes.